Rulemate Automatic Bilge Pump 500GHP

The Rule-MateG consists of a powerful Rule bilge pump and a new non-mercury float switch in a single housing. The pumps are available in 3 different capacities, 500GHP, 750GHP and 1100GHP.

While fully automated, the pump will only turn on when the water level rises. There is no cycling and no battery drain, making it all the more convenient. The pump will remain off until the internal float switch rises. The pump then stays on until all the water is evacuated. The pump's internal computer senses no load (water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris.

Each pump is easily installed with the pump and switch wired internally. A third wire allows the pump to be connected to a manual override switch if so desired.